Also have one more question, did under diagnostic tab in starline Master, when engine start, near engine icon nothing shows,  no parameter. It should be like this, or should show something?

Like writed in manual:

First enter training mode by pressing the service button 14 times
When turn on the ignition no later than 5 seconds
After 10-15 seconds, start the engine
Wait for a confirmation double sound signal indicating successful completion.

I think no other method exist to bypass immobilizer. And also as you can see in video Starline Master shows, that immobilizer training completed successfully.

Maybe it will help to determine where the issue is.

The immobilizer bypass executable successfully. But car still start and stop after 3 seconds and security led don`t turn off. I filmed couple video. One with all settings and another how car react, when trying start via Starline Master.

You mean screenshot of the Starline Master program? Which section screenshot I should take?

Yes, I complete this Immobilizer bypass procedure successful. Strange is, that if I start car normal by sitting in the car and pressing start/stop button with the oem remote key in the hand, security led on the dashboard turns off. But if try start car from Starline Master program or via Starline mobile app, engine starts, but security led don`t turn off and engine turn off after 3 seconds. Should security led on car dashboard turn off, when car is via Starline Master starting and immobilizer procedure bypass was successful?

When I try start engine from Starline Master, car react same. Engine starts and after couple second turn off, in Starline Master program i got message - engine speed lost and in car dashboard security led is blinking.